Fire Door Services
The Fire Door
Fire doors / internal fire doors are crucial for compartmentalizing a building. This compartmentalization slows down the spread of fire, allowing for more time for evacuation. Various components of a Fire Rated Door will wear down over time and require testing, maintenance, and repairs. Scheduling regular Fire Door Services, maintenance, and regular fire door inspections is not only recommended for optimal fire protection. It is also required to ensure fire doors are fully operational during an emergency.
Fire doors are mandatory in a wide variety of buildings. Including (but not limited to) hospitals, as well as any building with elevator shafts, lobbies, and exit stairwells. The specific type of fire door needed depends on several different factors, including occupancy classification and location.
Schedule Fire Door Service Consultation Today
The NFPA has specific guidelines for fire door testing and maintenance. For that reason, the maintenance of fire doors should always be handled by certified professionals. KORD Fire Protection’s reliable and affordable services are in full accordance with NFPA 80. With decades of experience in fire protection, KORD has the tools, knowledge, and experience to service all your fire protection system needs.
Fire Door Inspection & Testing Services
Fire door testing is to be done annually, as well as after any inspection or maintenance that affects the door’s operation or performance. Additionally, testing should be conducted upon installation. Testing requires the visual inspection of the fire rated door by qualified personnel, such as a certified fire safety technician. The technician will inspect any self-closing components, labeling, hinges, gaps, hinges, glazing, latching components, and any other related hardware in addition to necessary testing.
Fire Door Repairs
Gapping, painted labels, and failure to latch and shut are common issues that can occur with fire doors over time. Especially with doors that are frequently used, components can wear down over time and become non-compliant with NFPA 80 regulations.
Every component, from handles to hinges and any windows on an internal fire door, is also required to be fire rated. The maintenance and repair of these components are vital when it comes to ensuring NFPA 80 compliance.
Fire Door Installation & Services
Fire rated doors are vital to fire safety. They compartmentalize flames, smoke, and toxic fumes, helping to give occupants additional time to evacuate. In conjunction with full fire protection systems, fire doors reduce property damage and help keep occupants safe in the event of a fire.
A fire door inspection is essential for ensuring your building’s safety and compliance. Regular fire door inspections help detect issues like gaps or damaged hardware that can compromise fire safety. By scheduling professional fire door services, you ensure your Fire Rated Doors meet regulations and enhance protection for occupants.
Protect Your Property
Get the latest fire safety tips delivered straight to your inbox.
Types of Rated Fire Doors
There is no one-size-fits-all solution when it comes to fire doors. From factories to hospitals, residential buildings, and just about everything in between, there are different types of fire doors that might be required or better suited to fit the space.
- 01Swinging Doors
- 02Sliding Doors
- 03Rolling Steel Doors
- 04Fire Shutter
- 05Service Counter Fire Doors
- 06Hoistway Doors
- 07Chute Doors
- 08Access Doors
- 09Fire Curtains
- 10Commercial Fire-Resistant Accordion Doors
Sliding Fire Doors
NFPA 80 divides swinging doors into two categories: those with builders hardware and those with fire door hardware. Swinging fire doors are typically made from wood, steel, or glass and are accompanied by a label that includes vital information such as its rating.
Swinging Fire Doors
Sliding doors are also divided into two categories: horizontal and vertical. Both are more common in industrial settings and use counterweights to automatically close in the event of a fire. Part of internal fire doors;
Rolling Fire Doors
Rolling steel doors, also commonly referred to as roll-up doors, are designed to be rolled up and stored away when not in use. In the event of a fire, the steel door descends to protect wider areas than typical door frames. These can typically be found in warehouses and storage facilities.
Fire Shutter Doors
NFPA 80 classifies fire shutters into three categories: swinging doors, horizontally or vertically sliding doors, or rolling steel doors. When installed on a building’s exterior, NFPA 80 requires protection against weather to ensure the fire shutter operates properly in the case of an emergency.
Service Counter Fire Doors
Service counter fire doors are similar to rolling steel doors but have a more compact design, suitable for various settings, such as concession stands and cafeterias. NFPA 80 requires service counter fire doors to contain wall guides, frames, sills, latching, and a counterbalancing mechanism.
Elevator Hoistway Door
Hoistway doors are entrance points to elevator cabins. These fire rated doors are designed to keep flames from spreading from floor to floor through the elevator shaft.
Fire Rated Chute Door
Like hoistway doors, fire rated chute doors are designed to keep flames from spreading to different floors. However, chute doors compartmentalize fire rising through areas, such as trash or laundry chutes.
Fire Rated Access Panels
Like chute doors, fire rated access doors are typically a bit smaller. These access doors compartmentalize flames, helping keep fire from moving to the roof or an attic space.
Fire Curtains
Fire curtains are similar to rolling steel doors, however the former offers a lighter and more compact design. Like rolling steel doors, fire curtains are designed to deploy in the event of a fire and prevent and contain the spread of flames and smoke.
Commercial Fire-Resistant Accordion Doors
Won doors are accordion-style fire rated doors that can serve a wide variety of spaces. These doors remain open until deployed in the case of a fire or remotely.
What are fire rated doors and why are they important for building safety?
Fire-rated doors are specially designed to resist fire and prevent its spread for a specified time. They are crucial for building safety as they help contain fires, protect escape routes, and allow more time for evacuation. Regular fire door inspections ensure these doors function correctly and meet safety standards. Professional Fire Door Services can help maintain and repair internal fire doors to ensure ongoing functionality.
Fire Door Services FAQs
How do I maintain my internal fire doors to ensure they function properly?
Check for damage to the door and frame regularly. Ensure the door closes fully, the seals are intact, and the self-closing mechanisms works correctly.
What are the benefits of regular fire door inspections for my building?
Regular inspections ensure fire doors are in good condition and will function in an emergency. They also help you stay compliant with safety regulations and avoid potential fines.
How often should fire door inspections be done?
Fire doors should be inspected at least once a year. Regular checks are also recommended between formal inspections for best safety practices.
Why are fire door ratings important for building safety?
Fire door ratings indicate how long a door can resist fire, helping to contain flames and smoke. This protects occupants and allows more time for evacuation.
Can fire rated doors be installed in both commercial and residential buildings?
Yes, fire-rated doors can be installed in both commercial and residential buildings. They are required in certain areas for safety compliance in both types of buildings.
What should be done if a fire door fails during an inspection?
If a fire door fails an inspection, repair or replace it immediately to ensure it meets safety standards. Document the issues and follow up with a re-inspection.
Lets talk now?
The NFPA has specific guidelines for fire door testing and maintenance. For that reason, the maintenance of fire doors should always be handled by certified professionals. KORD Fire Protection’s reliable and affordable services are in full accordance with NFPA 80. With decades of experience in fire protection, KORD has the tools, knowledge, and experience to service all your fire protection system needs.
